In a method for reheating an atmospheric vaporizer, a cryogenic liquid is vaporized by heat exchange with ambient air in the atmospheric vaporizer and to reheat the vaporizer, a gas is sent thereto at a temperature of at least 0° C., this gas originating from a cryogenic distillation air separation unit.

A method for temperature-controlled delivery of the gaseous product at temperatures at or below ambient in the event of an air separation unit failure. In one embodiment, a first portion of a stored cryogenic liquid product is sent to the back-up vaporizer and heated to ambient conditions, and a second portion of stored cryogenic liquid product, which is at the cryogenic storage temperature, bypasses the back-up vaporizer using a bypass line controlled by a bypass valve and is mixed with the vaporized gas. This mixed stream will then preferably go through a static mixer in order to get to an homogenous temperature that is below the ambient temperature. A temperature control loop can be used to adjust the opening of the by-pass valve in order to reach the desired product temperature.

A liquefier device which may be a retrofit to an air separation plant or utilized as part of a new design. The flow needed for the liquefier comes from an air separation plant running in a maxim oxygen state, in a stable mode. The three gas flows are low pressure oxygen, low pressure nitrogen, and higher pressure nitrogen. All of the flows are found on the side of the main heat exchanger with a temperature of about 37 degrees Fahrenheit. All of the gasses put into the liquefier come out as a subcooled liquid, for storage or return to the air separation plant. This new liquefier does not include a front end electrical compressor, and will take a self produced liquid nitrogen, pump it up to a runnable 420 psig pressure, and with the use of turbines, condensers, flash pots, and multi pass heat exchangers. The liquefier will make liquid from a planned amount of any pure gas oxygen or nitrogen an air separation plant can produce.

Method for separating air by cryogenic distillation, wherein at least part of the air to be distilled is boosted in an air booster, compressed air is allowed to expand in at least one expansion turbine and, if the pressure drop between two points of the booster passes under a threshold and/or a flow of the booster passes under a minimum flow of the booster, part of the air boosted in the booster is allowed to expand without having been cooled between the booster and the expansion turbine and the boosted expanded air is sent upstream or downstream of the at least one turbine, without having been cooled in the heat exchanger, after having been boosted.

A liquefier device which may be a retrofit to an air separation plant or utilized as part of a new design. The flow needed for the liquefier comes from an air separation plant running in a maxim oxygen state, in a stable mode. The three gas flows are low pressure oxygen, low pressure nitrogen, and higher pressure nitrogen. All of the flows are found on the side of the main heat exchanger with a temperature of about 37 degrees Fahrenheit. All of the gasses put into the liquefier come out as a subcooled liquid, for storage or return to the air separation plant. This new liquefier does not include a front end electrical compressor, and will take a self produced liquid nitrogen, pump it up to a runnable 420 psig pressure, and with the use of turbines, condensers, flash pots, and multi pass heat exchangers. The liquefier will make liquid from a planned amount of any pure gas oxygen or nitrogen an air separation plant can produce.

A system and method for supplying a backup product in an air separation device, as well as a system and method for supplying a lower-pressure product to a user by means of pressurization of a cryogenic liquid pump during normal operation of an air separation device, i.e., when the cryogenic liquid pump is in the cold standby state. By means of the system and method, a cryogenic liquid product taken from a storage tank is pressurized by the cryogenic liquid pump to produce a lower-pressure product by taking full advantage of the low-speed operation of the cryogenic liquid pump in the cold standby state, and the lower-pressure product is transmitted to product supply lines of a user, to achieve the function of supplying the lower-pressure product to the user. The system and method not only reduce the energy loss of the cryogenic liquid pump in the cold standby state for a long time, but also avoid the bleeding rate of the cryogenic liquid product generated by sending a part of the cryogenic liquid product back to the storage tank, so that the advantage of quickly starting the cryogenic liquid pump from the cold standby state is ensured, and the requirements of the user to the higher-pressure product and the lower-pressure product can be satisfied.

Method for separating air by cryogenic distillation, wherein air is compressed in a compressor and is subsequently sent to a heat exchanger, with the air cooled in the exchanger being sent to a check valve downstream of the heat exchanger and subsequently to a turbine, the valve being positioned so that air from a short-circuiting duct cannot return to the exchanger from the compressor.

In a method for reheating an atmospheric vaporizer, a cryogenic liquid is vaporized by heat exchange with ambient air in the atmospheric vaporizer and to reheat the vaporizer, a gas is sent thereto at a temperature of at least 0 C., this gas originating from a cryogenic distillation air separation unit.

A gas production system that can supply liquefied gas obtained by rectifying source gas as product gas continuously with high heat efficiency without using a machine that has a risk of contamination like a pump. A gas production system includes a single pressure device having a single pressurized container to which liquefied gas extracted from a rectification unit is supplied, a pressure line for extracting and vaporizing a part of the liquefied gas in the pressurized container and returning the part of the liquefied gas to the pressurized container, and a second heat exchange unit that is disposed in the pressure line, and a liquefied gas storage unit that stores liquefied gas which is led out from the pressurized container.

In a method for reheating an atmospheric vaporizer, a cryogenic liquid is vaporized by heat exchange with ambient air in the atmospheric vaporizer and to reheat the vaporizer, a gas is sent thereto at a temperature of at least 0 C., this gas originating from a cryogenic distillation air separation unit.